ANZ POS MOVE - Configuring Communication Methods; Switching Communication Options; Ethernet Internet Setup

50
20.1 SWITCHING TO AN ALTERNATIVE
COMMUNICATION OPTION
1
Press the MENU key to access ANZ POS Move terminal menu
2
Select TERMINAL
3
Select HOST COMMS
4
Use the F2 or F3 touchscreen buttons to scroll to the preferred
communication option and press ENTER
21. CONFIGURING COMMUNICATION TYPE
21.1 SET UP THE TERMINAL FOR BROADBAND INTERNET VIA
ETHERNET COMMUNICATION
The merchant must have Broadband Internet available in store and have an
Ethernet cable.
Ensure the base and terminal have been paired for Bluetooth
(refer to Section 21.3 for Pairing the terminal to the base for Bluetooth)
1
Plug the Ethernet cable into ‘ETH’ port behind the base
2
Press the MENU key to access ANZ POS Move terminal menu
3
Select TERMINAL
4
Select HOST COMMS