ANZ POS MOVE - Terminal System Operations; TMS Logon Procedure; Terminal Initialization Process

57
TMS Logon
1
Press the FUNC key
2
Key in 102 and press ENTER
3
Terminal will begin to do a TMS download
4
When completed the terminal will display ‘TMS ACTION FINISHED’ and
return to the ANZ idle screen
Terminal Initialisation
1
Press the FUNC key
2
Key in 110 and press ENTER
3
Terminal will begin perform an initialisation
4
When completed the terminal will display ‘LOGON APPROVED’ and
return to the ANZ idle screen
Note: If the screen does not display ‘LOGON IN PROGRESS PLEASE WAIT’
contact ANZ Merchant Services on 1800 039 025 for further assistance. If
you have an activation/reference number, please have the number handy.