Applied Biosystems StepOnePlus User Manual

DRAFT September 25, 2007 1:07 am, 4376782_Standalone_Installation.fm
Chapter 4 Install the Standalone Layout
Set Up the Computer
53
Applied Biosystems StepOne
™
and StepOnePlus
™
Real-Time PCR Systems
Installation, Networking, and Maintenance Guide
Notes
4. If you ordered a tower computer from Applied Biosystems, set the voltage
appropriately for your region as described in the computer installation guide.
5. (Optional) Install electrical protective devices to the computer.
Note: For more information, see “Select Protective Hardware and Software” on
page 7.
Power On the
Computer
1. Power on the computer and monitor.
2. Log onto the operating system:
• If you are using a computer that you provided, log on to the operating system as a
member of the Administrators user group.
• If you are using a computer from Applied Biosystems, enter
Administrator in
the User field, then click
Login . Leave the Password field blank.
IMPORTANT! If you are installing a computer that you provided, log onto the
Windows
®
operating system using a user account that belongs to the Administrators
user group.
3. In the Getting Started with Windows
®
XP window, deselect Show this screen at
startup, then click Exit.
4. Determine the next step:
•
If you are installing a computer that you provided , go to “Install the StepOne
™
Software” on page 54.
•
If you are installing a computer from Applied Biosystems , go to “After the
Installation” on page 71.
4

Applied Biosystems StepOnePlus Specifications

General

Brand	Applied Biosystems
Model	StepOnePlus
Category	Laboratory Equipment
Language	English