6
INSTALLATION
Crop
7 INSTALLATION OF ULTRASONIC SENSORS
It is the installer responsibility to check that all indications described are complied with.
The images relevant to sensors are purely indicative.
Precautions to follow for a long-lasting installation:
• Fix the sensor to a strong structure.
• Protect sensor body and connector with a guard.
• Keep sensor sensitive surface clean.
• Clean only with a soft wet cloth.
• Do not use aggressive detergents or products.
• Do not clean equipment with direct water jets.
Fig. 7
Yellow LED Yellow LED Green LED
Green
LED
CONNECTOR
Not connected
+ 12 V
GND
PIN
M12x1, 5-pin
Not connected
Analogue output
POSITION COLOR CONNECTION
1
Brown + 12 V
2
-- Not connected
3
Blue GND
4
Black Analogue output
5
-- Not connected
Fig. 8
Travel direction
(FORWARD)
INSTALLATION ORIENTATION
Connector
Sensitive flat
surface
Fixing holes
For a correct operation, respect the installation direction (Fig. 8).
To Next Page
Loading...
