Areca ARC-1280ML - SNMP Trap Configurations; SNMP System Configurations; SNMP Trap Notification Configurations; NTP Configuration (12;16;24-Port)

WEB BROWSER-BASED CONFIGURATION
140
• SNMP Trap Congurations
Enter the SNMP Trap IP Address.
• SNMP System Congurations
About community, please refer to page 149 of SNMP commu-
nity name. The system Contact, Name and Location that will
be shown in the outgoing SNMP Trap.
•
SNMP Trap Notication Congurations
Please refer to page 107 of Event Notication Congurations.
6.8.5 NTP Conguration (12/16/24-port)
The Network Time Protocol (NTP) is used to synchronize the time
of a computer client or server to another server or reference time
source, such as a radio or satellite receiver or modem. It provides
accuracies typically within a millisecond on LANs and up to a few
tens of milliseconds on WANs relative to Coordinated Universal
Time (UTC) via a Global Positioning Service (GPS) receiver, for
example:
•
NTP Sever Address
The most important factor in providing accurate, reliable time is
the selection of NTP servers to be used in the conguration le.
Typical NTP congurations utilize multiple redundant servers and
diverse network paths in order to achieve high accuracy and re-
liability. Our NTP conguration supports two existing public NTP
synchronization subnets.