HARDWARE INSTALLATION
31
2. Hardware Installation
This section describes the procedures for installing the ARC-11xx/12xx
series controllers.
2.1 Before Your begin Installation
Thanks for purchasing the SATA RAID Controller as your RAID data
storage and management system. This user guide gives simple
step-by-step instructions for installing and conguring the SATA
RAID Controller. To ensure personal safety and to protect your
equipment and data, carefully read the information following the
package content list before you begin installing.
Package Contents
If your package is missing any of the items listed below, contact
your local dealer before proceeding with installation (disk drives
and disk mounting brackets are not included):
ARC-11xx Series SATA RAID Controller
• 1 x PCI-X SATA RAID Controller in an ESD-protective bag
• 4/8/12/16/24 x SATA interface cables (one per port)
• 1 x Installation CD
• 1 x User Manual
ARC-11xxML/12xxML Series SATA RAID Controller
• 1 x PCI-X SATA RAID Controller in an ESD-protective bag
• 1 x Installation CD
• 1 x User Manual
ARC-12xx Series SATA RAID Controller
• 1 x PCI-Express SATA RAID Controller in an ESD-protective bag
• 4/8/12/16/24 x SATA interface cables (one per port)
• 1 x Installation CD
• 1 x User Manual
To Next Page
Loading...
