Areca ARC-1280ML - Delete Pass-Through Disk; Identify Selected Drive

To Next Page

To Previous Page

BIOS CONFIGURATION

3.7.4.4 Delete Pass-Through Disk

To delete a Pass-through drive from the Pass-through drive pool,

move the cursor bar to the Physical Drive Function menu and

select the Delete Pass-Through Drive item, then press the Enter

key. The Delete Pass-Through conrmation screen will appear;

select Yes to delete it.

3.7.4.5 Identify Selected Drive

To prevent removing the wrong drive, the selected disk HDD

LED Indicator will light for physically locating the selected disk

when the Identify Selected Device is selected.

Controller I/O Port:F3000000h, F2: Select Controller, F10: Reboot System

ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw

Areca Technology Corporation RAID Controller

Main Menu

Quick Volume/Raid Setup

Raid Set Function

Volume Set Function

Physical Drives

Raid System Function

Ethernet Conguration

View System Events

Clear Event Buffer

Hardware Monitor

System information

Physical Drive Information

View Drive Information

Create Pass-Through Disk

Modify Pass-Through Disk

Identify Selected Drive

Delete Pass-Through

Select The Drive

Ch01| 80.0GB| Pass Through |ST380013AS