Areva FLUOKIT M24+ - Connection of the low voltage circuits; Marking the functional unit on the LV box cover; Motorised remote control interface for the switches

27
8 Connection of the low voltage circuits
8.1 Marking the functional unit on the LV box cover
F On the front panel, the cover
may bear an ID plate –
identifying the functional unit.
F If this is the case, this
description must be noted on
the label within the box.
F The cover is thus permanently
linked to a single functional unit.
8.2 Motorised remote control interface for the switches [option]
F Front face of the box. F Neutralization switch marked
UFA.
F The cable connection is
delivered with a connector
marked UFA, and a packet of
labels.
Packet of
labels
Connector