Areva FLUOKIT M24+ - At the end of the equipments operational life; Valorisation of the equipment; Safety instructions; Dismantling of the equipment service

50
19 At the end of the equipment’s operational
life
19.1 Valorisation of the equipment
Our Functional Units are composed
of recyclable elements.
The tables (§ 19.5) give information
and figures for the types of mate-
rials, their quality and their methods
of valorisation.
They enable the following:
− Calculation to be made of the
capacities for valorisation,
− Optimising the valorisation pro-
cess,
− Evaluating the cost of valorisation.
The indications given in tables
(§ 19.5) facilitate co−operation bet-
ween users and companies specia-
lised in elimination to valorise the
product at the end of the product’s
service life.
Steel
Copper
Copper
Copper + Alu
PGB − 24 kV − 400 A (750 mm wide)
3
*
*
2
1
*
Thermosetting parts
+ copper + SF6
Thermosetting parts
1
*
2
*
19.2 Safety instructions
Do not dismantle the
mechanical control mecha-
nism springs without the
releasing device.
Do not open the poles
without first having recovered
the SF6 gas using the appro-
priate tools.
Do not dismantle the ear-
thing switch’s springs without
the releasing device.
19.3 Dismantling of the equipment service
Consult AREVA for all decommis-
sioning services.
F Remove all electrical equipment
(coils, motors, etc.).
F On disassembly, the materials
must be sorted and sent on via
the appropriate recycling
channels.
1
2 3