41
F Padlocking the door panel. F Padlocking of the tripping button
on a C430 mechanical control
mechanism.
All of the passage holes are
designed for padlock shack-
les of ∅ 6 to 8 mm.
The fitting of several padlocks
at a single point requires the
use of an accessory that is not sup-
plied.
15.3 Locking−out by key locks
For all locking operations by key
locks, consult the instructions
manual "Instructions for the installa-
tion of standard locks by key locks"
(see § 2.5).
To Next Page
Loading...