PRELIMINARY
Menu Operation
USER MANUAL
Ascom i63 VoWiFi Handset
Set Alerts for Messages
1 Select Message alert. Different message alerts can be
selected. The handset has eight different message
alerts by default, see Settings, page 105.
2 Select message alert from list. Press Play to listen to
the different sounds.
The option Custom sounds should be
selected to create a customized message
alert. For more information, refer to the
Configuration Manual, Ascom i63 VoWiFi
Handset, TD 93300EN.
The Play Soft key is not available for
Enhanced beep and Custom sound. Instead,
send a message to the handset to listen to
the sound.
3 Press Back.
By default, the message volume follows the ring volume setting. However, a different message volume can
be set if required. For more information, refer to the Configuration Manual, Ascom i63 VoWiFi Handset, TD
93300EN.
Turn the Vibrator On or Off
If the vibrator is activated, it vibrates on incoming calls and messages. In addition, the vibrator can also be
activated when receiving a message during a call. For more information, refer to the Configuration Manual,
Ascom i63 VoWiFi Handset, TD 93300EN.
1 Select Vibrating alert.
Choose between the following:
• On
• On if silent (The vibrator is on only when the
handset is muted.)
• Off
2 Press Back.
Set the Key Sound
This means that every time a key is used, the handset gives a small sound.
1 Select Key sound. Choose between Silent, Click, or
Tone.
2 Select key sound.
3 Press Back.
To listen to the key sound, press the Play Soft key.
67 TD 93289EN / / Ver.
To Next Page
Loading...
Need help?
General
