63
Appendix
2.1 POWER ON
2.2 POWER OFF (Power Off immediately)
2.3 POWER OFF
Command “A00”[CR] (Hex: 41 30 30 0d)
Details Power ON the projector in standby mode.
Return
OK [ACK] [CR]
NG “?” [CR]
Command “A01”[CR] (Hex: 41 30 31 0d)
Details Power off the projector immediately.
Return
OK [ACK] [CR]
NG “?” [CR]
Command “A02”[CR] (Hex: 41 30 32 0d)
Details
"Power off?" displays for the command, resend the command to power off the
projector.
Return
OK [ACK] [CR]
NG “?” [CR]
2.5 HDMI 2
Command “A03”[CR] (Hex: 41 30 33 0d)
Details Select HDMI 2 as input source.
Return
OK [ACK] [CR]
NG “?” [CR]
2.4 HDMI 1
Command “A36”[CR] (Hex: 41 33 36 0d)
Details Select HDMI 1 input source.
Return
OK [ACK] [CR]
NG “?” [CR]
To Next Page
Loading...
