8Maintenance
Location
of
nut
Figure
52.
Air
Filter.
4.
Slide the new air filter into the sterilizer until it is firmly seated.
5.
Replace and tighten the nut that attaches the air filter to the sterilizer.
6. Discard the used air filter as directed by your facility's policy.
PCMCIA Card Handling and
Replacement
The PCMCIA card contains the flash memory used to store cycle data.
If
you wish to save cycle data and do not have a network connection, the
cycle data can be transferred directly from the PCMCIA card to a computer
equipped with a PCMCIA card slot. To access the cycle data, perform the
following steps:
1.
Turn
off
the sterilizer.
2.
Eject the PCMCIA card
by
pressing the eject button on the left
of
the
card slot (see the following figure ).
The card can now be inserted into a computer to transfer the files. Refer to
the operating instructions
of
your computer before installing a PCMCIA
card
in
your computer. Once the cycle data
is
transferred, the PCMCIA
card must be reinserted
in
the sterilizer
by
following these steps:
1.
Examine the PCMCIA card.
STERRAO<l!>
NX'" User's Guide
88
To Next Page
Loading...
