Assa Abloy Effeff Technilock L4 Series - Problem, Cause, Solution; No Reaction to the Trigger Signal

41
Problem, cause, solution
EN
No reaction to the trigger signal
Problem: The Technilock
®
L4 does not react to an electrical trigger action and does not unlock the door.
Cause: The Technilock
®
L4 may have been locked with the locking cylinder.
A technical error may be present.
Solution: Unlock the Technilock
®
L4 via the locking cylinder.
Check carefully whether the Technilock
®
L4 locks again automatically.
If the automatic function fails, you must lock it again using the locking cylinder.
Read the chapter “Locking via the locking cylinder”, page 27.
Problem, cause, solution