31
Alarm Volume
Scroll the cursor to the Alarm parameter using the directional soft keys. When the cursor is
pointing to the Alarm parameter, you may use the “+” soft key to increase and decrease the
volume of the Alarm.
The numbers corresponding to the different volume settings are 0 through 9, 0 meaning the
volume is off and 9 being the loudest setting. After the “+” or is pressed, a momentary alarm
chirp will occur to indicate the volume of the new setting.
LCD Contrast
Scroll the cursor to the Contrast parameter using the directional soft keys. When the cursor is
pointing to the Contrast parameter, you may use the “+” soft key to increase and decrease the
contrast of the LCD display.
The numbers corresponding to the different contrast settings are 0 through 9, 0 meaning the
lightest color of displayed characters and 9 meaning the darkest color of displayed characters.
After the “+” is pressed, the display will automatically adjust to the new display setting.
Results
Scroll the cursor to the Results parameter using the directional soft keys. When the cursor is
pointing to the Results parameter, you may use the “+” soft key to select what type of results
you would preferred displayed at the end of a test or sequence of connected steps. The
available selections are: All, P/F and Last.
When All is selected, a Results summary screen will be displayed at the end of the test or
sequence of connected steps, displaying the results of all of the steps. The Results summary
screen will appear as follows:
To Next Page
Loading...
Need help?
General
