ASTi ACE Target - Page 6

v
9.0 Configure the Telestra Target network
33
10.0 ACEStudio cold start procedure
35
10.1 ACEStudio cold start procedure for Red Hat 5.X
35
10.1.1 Install Red Hat 5.10 and higher
35
10.1.2 Install ACEStudio 4.5 and higher
37
10.1.3 ACEStudio 4.X development workstation setup
39
10.2 ACEStudio cold start procedure for Red Hat 6.X
41
10.2.1 Install ACEStudio versions 6.0 and higher
41
10.2.2 Set up ACEStudio 6.X development workstation
42
10.3 ACEStudio cold start procedure for Red Hat 7.X
45
11.0 Restore system backup
46
12.0 Options files
47
12.1 Upload Options files to the RMS
48
Appendix A: Memory Test procedures
49
A-1 Memory Test (ACE software version 6.X)
49
A-2 Memory Test (ACE software versions 4.31 and higher)
49
A-3 Memory Test (ACE software versions 4.10–4.30)
50
Appendix B: Install older software versions
51
B-1 Install Red Hat 5.1–5.9
51
B-2 Install ACEsoftware versions 4.5–4.12
51
B-3 Install ACE Target versions 4.1–4.4
52
B-4 Install ACEStudio versions 4.1–4.4
54