To Next Page
A
Alexandra BautistaSep 2, 2025
How to fix feeding problems with AstroJet M1?
- MMaria GomezSep 2, 2025
If your AstroJet Printer is experiencing feeding problems such as double sheets or misfeeds, you should adjust the Sheet Separators.
How to fix feeding problems with AstroJet M1?
If your AstroJet Printer is experiencing feeding problems such as double sheets or misfeeds, you should adjust the Sheet Separators.
Why AstroJet Printer has no print or crisp blocks of missing drops?
If your AstroJet Printer is producing no print or crisp blocks of missing drops, it may be due to an electrical failure or poor electrical connection. Try reseating the Printhead. If that doesn't work, replace the Printhead.
What causes AstroJet M1 to show regularly missing or misdirected nozzles or ink color mixing?
Regularly missing or misdirected nozzles, or ink color mixing on your AstroJet Printer, is often caused by debris on the Printhead. You can try performing the startup routine. Clean the Printhead using one of the Cleaning Levels in the Driver or Toolbox. Wipe the Printhead manually with distilled water and a wet, clean, lint-free cloth. If the problem persists, consider replacing the Printhead.
How to resolve missing parts of letters or text on AstroJet M1 Printer?
If your AstroJet Printer is missing parts of letters or text, it could be due to air and bubbles blocking the Nozzles. Clean the Printhead using recirculation, priming, or cycles of depriming and priming found in the Driver or Toolbox. You can also rehydrate the Printhead using distilled water and a wet, clean, lint-free cloth. Note that bubbles often disappear with Printer use.
What to do if the AstroJet M1 Printer has ink mixing or muddy colors?
If you are experiencing mixed or muddy colors with your AstroJet Printer, it may be due to ink flooding, air in the Printhead, or a dirty Printhead. Clean the Printhead using one of the Cleaning Levels in the Driver or Toolbox, or manually wipe the Printhead with distilled water and a wet, clean, lint-free cloth.
What to do if my AstroJet Printer has media jams?
If your AstroJet Printer is experiencing media jams, it could be due to double feeding, curled or bent media, or media that is too thin. Try adjusting the Sheet Separators on the Feeder. Uncurl the media if it is bent. Ensure the media thickness is at least 0.004".
How to fix blurry address printing on AstroJet M1 Printer?
If your AstroJet Printer is producing blurry addresses, it might be due to an image that is not sharp. To resolve this, clean the Printhead using one of the Cleaning Levels in the Driver or Toolbox. Alternatively, manually clean the Printhead with distilled water and a wet, clean, lint-free cloth.
Essential safety rules for operating the AstroJet M1 printer.
Identifies and explains components visible from the front, rear, print engine, and ink tank door.
Explains the printer's control panel buttons and LED status lights.
Lists package contents, guides on location, unpacking, and initial setup.
Instructions for removing transport tabs and shipping tape from the printer.
Guides on attaching various guides and supports to the printer.
Details on plugging in, connecting to a computer, and power management.
Steps for installing the necessary software driver on the computer.
Procedure for installing the five ink tanks into the printer.
Instructions for carefully installing the printhead.
Covers removing the Head Media Guide and installing/removing envelope attachment spacers.
Explains how to adjust paper guides and separators for proper media feeding.
Guides on configuring print jobs, especially in MS Word.
Explains the various settings available in the printer driver's general tab.
Details options for resizing, scaling, and adjusting print layout.
Explains using the utility for printer status, diagnostics, ink usage, network, and service.
Procedure for downloading and installing the latest printer firmware.
Step-by-step guide for replacing empty ink tanks.
Instructions for cleaning contacts to ensure proper ink level detection.
Procedures for manual cleaning and replacement of the printhead.
Guidelines for storing printheads and understanding their lifespan and return policy.
Steps for removing and installing the printer's service station.
Guides for replacing the ink waste tray and sheet separators.
Steps for clearing jams and general printer cleaning procedures.
Steps for preparing the printer for shipment or transport.
Common problems and solutions related to the Memjet printhead.
Common problems and solutions for the printer hardware and connectivity.
Explains error messages and status indicators from the driver and toolbox.
Technical specifications of the printer, including resolution, speed, and dimensions.
Lists available ink tanks and optional accessories for the printer.
General