Asus RS700A-E9-RS12 User Manual

Chapter 2: Hardware Information
2-22
2.5.4 Replacing the ASUS PCIE-NVME4-OCuLink card on
the riser card bracket (for RS700A-E9-RS12 only)
TheASUSPCIE-NVME4-OCuLinkcardpre-installedontherisercardbracketonthePCIE1
allowsyourserversystemtosupportNVMEstoragedevicesonBay9toBay12.
ToreplaceanASUSPCIE-NVME4-OCuLinkcardontherisercardbracket:
3. Remove the screw from the metal
cover(A),thenremovetheASUS
PCIE-NVME4-OCuLinkcard(B)from
the riser card bracket.
2. FirmlyholdtherisercardbracketandASUSPCIE-NVME4-OCuLinkcardassembly,
then pull it up to detach it from the PCIE x24 slot on the motherboard.
PCIE x24 slot
1. Remove the OCuLink cables from its corresponding slots.
OCuLink port 4
OCuLink port 3
OCuLink port 2
OCuLink port 1

Asus RS700A-E9-RS12 Specifications

General

Brand	Asus
Model	RS700A-E9-RS12
Category	Server
Language	English