EN 43
Choose the desired mode and
function (and set the temperature if
preferred).
Press END TIME.
The current time will be shown
blinking on the DISPLAY.
Example Current time is 13:00.
The current time’s digit
“13:00” will blink.
Turn the MULTI-FUNCTION
SELECTOR to set the desired End
Time (14:00).
Example Desired time is 14:00.
Press END TIME again.
Example Current time is 13:00.
Desired end time is 14:00.
Press START to start the oven.
Cooking time “1:00” is displayed.
The oven will start promptly.
Note
1) The cooking time will count down in the time display. When the setting time has elapsed, an
audible signal sounds, “0:00” will blink in the display and the oven switches itself o .
The current time is shown in the display.
2) During cooking, you can adjust the preset cooking time for better cooking performance.
Press COOK TIME and change the time with the MULTI-FUNCTION SELECTOR.
3) The end timer can be reset in the same order as above. To cancel the programmed end
time, press END TIME and set the time to the current time.
12
43
5
SETTING THE END TIME
To Next Page
Loading...
Need help?
General
