AT&T 1070 - Intercom and Paging System; Intercom Call Procedures

25
DTAD feature menu (1080 only)
Use the features in this menu to listen to and delete incoming messages, and
to record and review outgoing messages.
To enter the DTAD menu:
1. Press
[DTAD] when the phone is idle. You see DTAD FEATURE.
2. Press
[ ] or [ ] to move among the different DTAD categories. When you
see a category that you want to customize, press [ENTER].
3. Press
[ ] or [ ] to get to a specific feature.
4. You may need to use
[ ] or [ ] to choose a subfeature.
5. Press
[ENTER] when the feature is correct.
NOTE: Press [ ] to get out of the feature, press [DTAD] or press and hold
[ENTER] to exit setup.
For more detailed instructions on using the DTAD feature menu, see 1080 user’s
manual.