AT&T 1070 Installation Guide

33
Phone settings
RINGER ON/OFF
Use this feature to control whether there is
audible alerting for outside calls on a line.
1. Press
[ENTER].
2. Press
[ ] or [ ] until you see PHONE SETTINGS.
Press [ENTER].
3. Press
[ ] or [ ] until you see RINGER ON/OFF.
Press [ENTER].
4. Press
[ ] or [ ] to select the desired line
(L1 RINGER, L2 RINGER, L3 RINGER or L4
RINGER).
5. Press
[ ] or [ ] to turn the ringer ON or OFF.
ON is the default setting.
6.
To move to the next line, press [ ].
-OR-
To exit setup,
press and hold [ENTER].
RINGER TYPE
Use this feature (also known as selectable ring
tones) to choose one of four ringer types for
incoming calls. You can choose different ringer
types for the different lines so you can easily
identify which line is ringing.
1. Press
[ENTER].
2. Press
[ ] or [ ] until you see PHONE
SETTINGS. Press [ENTER].
3. Press
[ ] or [ ] until you see RINGER TYPE.
Press [ENTER].
4. Press
[ ] or [ ] to highlight the desired
line (L1 RINGER TYPE, L2 RINGER TYPE, L3
RINGER TYPE or L4 RINGER TYPE).
5. Press
[ ] or [ ] to highlight the desired ringer
type (TYPE 1, TYPE 2, TYPE 3 or TYPE 4).
6.
To move to the next line, press [ ].
-OR-
To exit setup,
press and hold [ENTER].
RINGER TYPE
TYPE 1
L1 RINGER TYPE
RINGER ON/OFF
ON
L1 RINGER

AT&T 1070 Specifications

General

Lines Supported	1
Speakerphone	Yes
Caller ID	Yes
Display	LCD
Intercom	Yes
Handset Locator	No
Call Waiting	Yes
Volume Control	Yes
Redial	Yes
Power Source	AC Adapter
Type	Corded