51
AUTO ATT SETUP (1080 only)
RESET AUTO ATT, (1080 only)
Use this feature to return auto attendant setup for
all phones to default.
STOP
When you confirm this function on a 1080
telephone, all settings in the AUTO ATT SETUP
menu and SYS EXT MAILBOX menu of all 1080
telephones will return to the factory settings.
1. Press
[ENTER] on the desired 1080 system
telephone.
2. Press
[ ] or [ ] until you see AUTO ATT SETUP.
Press [ENTER].
3. Press
[ ] or [ ] until you see RESET AUTO ATT.
Press [ENTER].
4. The screen displays
CONFIRM? Press [ENTER]
within three seconds to confirm the command
and reset all settings. If you do nothing, the
screen eventually times out, and no changes
are made.
5.
To move to MAIN MENU, press [ ].
-OR-
To exit setup,
press and hold [ENTER].
NOTE: Resetting the auto attendant cancels
call forwarding from all 1040 or 1070 phones. See
the 1070 or 1040 user’s manual.
AUTO ATT SETUP
RESET AUTO ATT
RESET AUTO ATT
ENTER: CONFIRM ?
To Next Page
Loading...
Need help?
General
