50
AUTO ATT SETUP (1080 only)
DAY/NIGHT TIMES
Use this feature to specify times to be considered day or night for auto
attendant features.
The auto attendant feature only works with a multi-phone system. If you need
to have different outgoing messages at different times of the day, you MUST
program the hours for day and night times so the answering system plays the
correct auto attendant outgoing announcement.
AUTO ATT SETUP
DAY/NIGHT TIMES
DAY/NIGHT TIMES
DAY TIME
DAY/NIGHT TIMES
NIGHT TIME
NOTE: It is only
necessary to set the
auto attendant day
and night times once
in an auto attendant
telephone. This setting
affects all other auto
attendant telephones
(if you have any) in the
same system.
1. Press [ENTER].
2. Press
[ ] or [ ] until you see AUTO ATT
SETUP. Press [ENTER].
3. Press
[ ] or [ ] until you see DAY/NIGHT
TIMES. Press [ENTER].
4. Press
[ ] or [ ] until you see DAY TIME. Press
[ENTER].
5. Press
[ ] or [ ] to choose the desired hour.
Press [ ].
6. Press
[ ] or [ ] to choose the desired minute.
Press [ ].
7. Press
[ ] or [ ] to choose AM or PM.
8. Press
[ ] or [ ] until you see DONE. Press
[ENTER] to finish the daytime setting.
9. Press
[ ] or [ ] until you see NIGHT TIME.
Press [ENTER].
10. Press
[ ] or [ ] to choose the desired hour.
Press [ ].
11. Press
[ ] or [ ] to choose the desired minute.
Press [ ].
12. Press
[ ] or [ ] to choose AM or PM.
13. Scroll to and select
DONE to return to the
DAY TIME or NIGHT TIME menu.
-OR-
To exit setup,
press and hold [ENTER].
To Next Page
Loading...
Need help?
General
