AT&T 1070 Installation Guide

47
AUTO ATT SETUP
EVERY 1080 = AA
AUTO ATT SETUP
NO 1080 = AA
AUTO ATT SETUP (1080 only)
EVERY 1080 = AA
Use this feature to make all 1080 phones auto
attendants.
1. Press
[ENTER] on any 1080 system telephone.
2. Press
[ ] or [ ] until you see AUTO ATT SETUP.
Press [ENTER].
3. Press
[ ] or [ ] until you see EVERY 1080=AA.
Press [ENTER].
4. The screen will show
CONFIRM? Press
[ENTER] within three seconds to confirm the
selection.
5.
To move to the next feature, press [ ].
-OR-
To exit setup, press and hold [ENTER].
NO 1080 = AA
Use this feature to make no 1080 phones auto
attendants.
1. Press
[ENTER] on any 1080 system telephone.
2. Press
[ ] or [ ] until you see AUTO ATT SETUP.
Press [ENTER].
3. Press
[ ] or [ ] until you see NO 1080 = AA.
Press [ENTER].
4. The screen will show
CONFIRM? Press
[ENTER] within three seconds to confirm the
selection.
5.
To move to the next feature, press [ ].
-OR-
To exit setup,
press and hold [ENTER].

AT&T 1070 Specifications

General

Lines Supported	1
Speakerphone	Yes
Caller ID	Yes
Display	LCD
Intercom	Yes
Handset Locator	No
Call Waiting	Yes
Volume Control	Yes
Redial	Yes
Power Source	AC Adapter
Type	Corded