AT&T 1070 Installation Guide

45
Special options
RESET ALL
Use this feature to return all feature settings for
this phone to their factory settings and erase
the redial stack and all one-touch entries. Voice
messages left in a 1080 mailbox are not erased.
STOP
If you reset all features to the default
settings, all previous feature programming and
one-touch entries are erased. You will need to
program your preferences for every feature again
and reenter numbers in one-touch locations. You
cannot undo the RESET ALL command.
1. Press
[ENTER].
2. Press
[ ] or [ ] until you see SPECIAL OPTIONS.
Press [ENTER].
3. Press
[ ] or [ ] until you see RESET ALL. Press
[ENTER].
4. The screen displays
RESET ALL? Press
[ENTER] within three seconds to confirm and
reset all settings. If you do nothing, the screen
will eventually time out, and no changes will
be made.
5.
To exit setup, press and hold [ENTER].
SPECIAL OPTIONS
RESET ALL
RESET ALL
ENTER: RESET ALL?

AT&T 1070 Specifications

General

Lines Supported	1
Speakerphone	Yes
Caller ID	Yes
Display	LCD
Intercom	Yes
Handset Locator	No
Call Waiting	Yes
Volume Control	Yes
Redial	Yes
Power Source	AC Adapter
Type	Corded