AT&T 1070 Installation Guide

37
Time/date
When the telephone is idle, the screen displays
the date and time. You can set the time manually
or, for 1080 and 1070 extensions, with incoming
caller ID information. Even if you have caller ID,
you must set the year once for voice messages to
have the correct day of the week.
1. Press
[ENTER].
2. Press
[ ] or [ ] until you see TIME/DATE.
3. Press
[ENTER] to see YEAR. Press the dial pad
keys to enter the correct year.
4. Press
[ ] until you see MONTH. Press the dial
pad keys to enter the correct month.
5. Press
[ ] until you see DATE. Press the dial
pad keys to enter the correct date.
6. Press
[ ] until you see HOUR. Press the dial
pad keys to enter the correct hour (12-hour
clock format).
7. Press
[ ] until you see MINUTE. Press the dial
pad keys to enter the correct minute.
8. Press
[ ] until you see AM/PM. Press [ ] or [ ]
to highlight AM or PM.
9.
To move to MAIN MENU, press [ ].
-OR-
To exit setup,
press and hold [ENTER].
NOTES:
• For the 1080 and 1070 extensions, caller ID
provides the time and date. Set the year so that
the day of the week can be calculated from the
caller ID information. After you set the time once,
it is updated automatically with incoming caller ID
information.
The time is set automatically only if you subscribe
to caller ID service provided by your local
telephone company (see the About caller ID
section on the 1080 or 1070 user’s manual).
Continued on next page
TIME/DATE
= 2007
YEAR

AT&T 1070 Specifications

General

Lines Supported	1
Speakerphone	Yes
Caller ID	Yes
Display	LCD
Intercom	Yes
Handset Locator	No
Call Waiting	Yes
Volume Control	Yes
Redial	Yes
Power Source	AC Adapter
Type	Corded