EasyManuals Logo

AT&T 1070 Installation Guide

AT&T 1070
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #85 background imageLoading...
Page #85 background image
79
About a fax machine
Adding a fax machine
You may wish to use a fax machine with your
phone. Choose line 3 or 4 for the fax machine,
and connect it according to the manufacturer’s
instructions for installation and use.
That line’s telephone number is your fax
number.
The same line can be used for outgoing calls,
(incoming faxes get a busy signal when the line
is in use).
Set your fax machine to answer on the first ring
(follow manufacturer’s instructions).
To prevent the fax line from ringing at all the
extensions, turn the ringer off for that line at
other extensions (see RINGER ON/OFF on
page 33).
NOTES:
1. Do not connect a fax machine to line 1. Doing
so interrupts the telephone’s intercom data
channel.
2. If you are using a fax switch, or a fax machine
with a built-in fax switch, see Using a fax
switch, below.
Using a fax switch
A fax switch lets the telephone know, before the
phone rings, whether an incoming call is a voice
call or a fax call. Some fax machines have a built-
in fax switch. Using a fax switch may affect the
operation of the LINE lights or other system
features.

Table of Contents

Other manuals for AT&T 1070

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AT&T 1070 and is the answer not in the manual?

AT&T 1070 Specifications

General IconGeneral
Lines Supported1
SpeakerphoneYes
Caller IDYes
DisplayLCD
IntercomYes
Handset LocatorNo
Call WaitingYes
Volume ControlYes
RedialYes
Power SourceAC Adapter
TypeCorded

Related product manuals