34
Phone settings
DELAY RING
Use this feature to set the length of time before
incoming calls ring at this telephone.
1. Press
[ENTER].
2. Press
[ ] or [ ] until you see PHONE SETTINGS.
Press [ENTER].
3. Press
[ ] or [ ] until you see DELAY RING.
4. Press
[ ] or [ ] to choose a setting, OFF or
2-30 seconds. If you selected OFF, the
telephone rings immediately when a call
is received. If you did not select OFF, the
telephone will ring after the desired ring delay
time. A ring cycle lasts about six seconds.
5.
To move to the next feature, press [ ].
-OR-
To exit setup,
press and hold [ENTER].
NOTE: For the 1080 only, if the answering
system (DTAD) delay time (ANSWER DELAY, see
the ANSWER DELAY section on the 1080 user’s
manual) is shorter than the delay ring time, the
answering system answers the calls without the
telephone ringing.
PHONE SETTINGS
OFF
DELAY RING
To Next Page
Loading...
Need help?
General
