54
SYS EXT mailbox (1080 only)
UNASSIGN MBOXES
Use this feature to cancel the auto attendant
mailbox function for all 1080 phones. Any 1070
or 1040 phones assigned to 1080 mailboxes now
have no mailboxes, although the already-recorded
messages are still there. Listen and delete all
extension messages before selecting UNASSIGN
MBOXES (see the Listening to messages -
internal access section in the 1070 or 1040
user’s manual).
1. Press
[ENTER] on any 1080 telephone in the
system.
2. Press
[ ] or [ ] until you see SYS EXT
MAILBOX. Press [ENTER].
3. Press
[ ] or [ ] until you see UNASSIGN
MBOXES. Press [ENTER].
4. The screen displays
CONFIRM? Press [ENTER]
within three seconds to confirm the command
and unassign the mailboxes. If you do nothing,
the screen eventually times out, and no
changes will be made.
5.
To move to the next feature, press [ ].
-OR-
To exit setup,
press and hold [ENTER].
UNASSIGN MBOXES
ENTER: CONFIRM ?
NOTE: After you select and confirm UNASSIGN
MBOXES above, none of the 1070 or 1040 system
extensions assigned to this 1080 telephone will
be able to listen to messages in the 1080 system
extension mailbox. To hear the messages, you need
to reassign the 1070 or 1040 system extensions
to the same 1080 telephone (page 53). For more
details of the internal access feature, see the
Listening to messages - internal access section in
the 1070 or 1040 user’s manual.
To Next Page
Loading...
Need help?
General
