AT&T 1070 Installation Guide

69
DTAD FEATURE MENU (1080 only)
Outgoing nighttime announcement
To play the nighttime announcement
1. Press
[DTAD].
2. Press
[ ] or [ ] until you see SYSTEM OGMS.
Press [ENTER].
3. Press
[ ] or [ ] until you see AA NIGHT-OGM.
4. Press
[ ] or [ ] until you see PLAY. Press [EN-
TER]. The current nighttime announcement will
be played. To stop playing, press [ENTER].
5. Press
[DTAD] to exit the DTAD feature menu.
To delete the nighttime announcement
1. During the nighttime announcement playback,
press [REMOVE]. The screen displays REMOVE?
2. Press
[REMOVE] again within three seconds to
delete your nighttime announcement.
3. Press
[DTAD] to exit the DTAD feature menu.
When you delete your outgoing announcement,
calls are answered with the preset nighttime
announcement described on the previous page.
SYSTEM OGMS
AA NIGHT-OGM
PLAY

AT&T 1070 Specifications

General

Lines Supported	1
Speakerphone	Yes
Caller ID	Yes
Display	LCD
Intercom	Yes
Handset Locator	No
Call Waiting	Yes
Volume Control	Yes
Redial	Yes
Power Source	AC Adapter
Type	Corded