Atomos SUMO19 User Manual

*Subject to change without notice Atomos Sumo19 – User Manual Edition 1: September 2017 10
Turning ON power to the Sumo19
The power button is located on the rear panel just above the SDI
connectors. Momentarily press the circular button on the top right side of
the Sumo19 as you look at the screen to power up the unit. After a couple
of seconds you will see the Atomos logo, and then the Sumo19 Home
Screen.
Turning OFF power to the Sumo19
To turn the unit off, touch menu on the home screen, and then press the
red Power off icon for 3 seconds the icon will go white when touched to
indicate activation of the button. The unit will then power off. You can also do
a forced power down by depressing the on/off button for three seconds.
Three seconds can seem like a long time! We’ve made it this
way to make absolutely certain that the Sumo19 can’t be turned
off accidentally.
4. Connecting the Sumo19 and powering up cont.
Turning OFF power via touchscreen
On
+ forced power down
(located on rear)
Menu Power off
Power Buon
Flashes red when recording

Atomos SUMO19 Specifications

General

Product color	Black
Housing material	Aluminum
Video capturing speed	120 fps
Maximum video resolution	3840 x 2160 pixels
DC voltage	16.8 V
Power consumption (typical)	75 W
Built-in display	Yes
Display diagonal	19 \
Display resolution	1920 x 1200 pixels
BNC input ports	1
HDD size	2.5 \

Weight and Dimensions

Depth	63 mm
Width	504 mm
Height	310 mm
Weight	5450 g