*Subject to change without notice Atomos Sumo19 – User Manual Edition 1: September 2017 41
12. Playback & Playout
Playback Mode
One of the key elements of the Sumo19 REC PLAY MONITOR EDIT is the
ability to utilize the monitor recorder as a play back and play out device
for the content that has been recorded whilst maintaining the same
visually lossless high quality images.
Pressing the Play button switches the device into
playback mode and the last clip recorded on to the
drive will instantly begin to playback.
Once within Play mode the complete Monitoring tool set is available
allowing you to analyse the content. This is key for establishing if takes
are out of focus, lighting has changed or previewing content with LUTs
applied.
Clips can be selected for play back by tapping the clip name at the top of
the screen, with the ability to skip to the next or previous clip via the on
screen controls.
Oncethelenamehadbeenpressedamenudisplayingtheclips
available on the drive will be displayed showing clip name (with Scene
shot Take numbers) as well as resolution, codec and duration. Tapping
tohighlightaclipwillshowapreviewoftherstframeinthebackground
and tapping again will play this clip or by pressing the play button.
When the playback content list menu is open play back will
automatically stop.
Whilst a Clip is playing you can play or pause the clip by using the main
play button in the center of the menu controls at the bottom of the screen.
Above the Monitor tools icons are also a Play and Pause button along
with additional play back controls.
By tapping this icon you can put the clip in to loop play
back. In and out markers for loop you can be placed and
cleared using the following buttons :
Press to turn on and mark loop starting point, press again
to remove both in and out loop markers. When loop in is
pressed the loop out point will automatically be set to the
end of the clip.
Press to place the loop out marker and replace the marker
at the end of the clip, press again to reset it to the end of
the clip.
These are accessed via the green ag tagging menu
Whilst a clip is playing these buttons have the
ability to play the clip back at 2 x or 4x speeds
both forward and in reverse.
Whilst a clip is Paused these buttons have the
ability to step the clip by 1 second either
forward or reverse to give you chance to
analyse the clip in more detail, this is
especially useful when combined with the 2:1
zoom function.
Playlist
Toincreasethefunctionalityandexibilityoftheplaybackmodethereis
also the ability to create a Playlist.
TostarttobuildaPlaylistpressonthelenameinthetopmenuand
open the content list. Then press the Playlist button,
which will turn green and reveal the options available.
It’s important to note that all clips in the Playlist must be in the same
codec, resolution and frame rate.
The Order Arrow allows you to choose order in which clips
playback. The clips are stored based on the order they
were recorded with the last clip recorded at the top of the
list. You can either play down the list (newest to oldest) or
up the list (sequential order).
This icon can be pressed to scroll through the Playlist
options. All will play all clips on the disk.
Will play only the clips that are tagged as favorites.
Will allow the clips for the Playlist to be selected using the
tick boxes.
Will include the favorites and also allow the ability to
selected additional clips to be played back.
The duration of each clip is combined together and are shown on the
scrub bar in play pack controls. A white vertical line indicates the
start and end points and clips will seamlessly playback across those
selected to be in the play lost.
LOOP
IN
LOOP
OUT
To Next Page
Loading...
Need help?
General
Weight and Dimensions
