*Subject to change without notice Atomos Sumo19 – User Manual Edition 1: September 2017 14
6. Master Caddy II, Screw Mounts and Sun Hood cont.
Attaching the Sun Hood
ForHDR,theviewingexperiencecaneasilybeinuencedbythe
environmental conditions and the best experience for viewing HDR
requires that you minimise the ambient light between your eyes and the
screen to easily resolve the dynamic range of the scene.
For this reason, we have developed an optional sun hood for Sumo. It
consists of a zippered corner construction that allows the user to collapse
and use as screen protection during transportation and securely screws
to the front face of Sumo to provide shelter for privacy and premium
outdoor monitoring.
To assemble the sun hood please follow the following steps:
Attach the base to the Sumo19 in the orientation shown above.
This is a snug t in order to minimize external light bleed.
Push the sunhood in, align the top and bottom screw mounting holes and
attach the retaining screws.
As the retaining screws provide anchor point for mounting make sure
they are rmly connected to provide a solid base.
With the Sun hood base in place, take the main section and pop this out
to form a rectangular tunnel and zip up the sides to ensure it looks like
the image above.
1 3
2
Attach base to Sumo19 Fold out the face of the hood
Screw the hood into the base
To Next Page
Loading...
Need help?
General
Weight and Dimensions
