page 3 – 5
D-16 / Feb 2003
FADER SECTION
DB-25 “LINE IN 9-10, TB IN” Connector
Pin 18 – HI
Pin 6 – LO Line 9 Lt In
Pin 19 – SH
Pin 4 – HI
Pin 17 – LO Line 9 Rt In
Pin 5 – SH
Pin 15 – HI
Pin 3 – LO Line 10 Lt In
Pin 16 - SH
Pin 1 – HI
Pin 14 – LO Line 10 Rt In
Pin 2 – SH
Pin 24 – HI
Pin 12 – LO TB In
Pin 25 – SH
Pin 10 – Digital Ground
Pin 23 – TB SW
Stereo Line Digital Inputs
Audio connection for digital stereo inputs takes place at “AES IN 1-8”
DB-25 connector. A pinout drawing on page 3-11 shows all wiring
connections at a glance.
Pin 24 – HI
Pin 12 – LO AES 1 In
Pin 25 – SH
Pin 10 – HI
Pin 23 – LO AES 2 In
Pin 11 – SH
Pin 21 – HI
Pin 9 – LO AES 3 In
Pin 22 - SH
Pin 7 – HI
Pin 20 – LO AES 4 In
Pin 8 – SH
Pin 18 – HI
Pin 6 – LO AES 5 In
Pin 19 – SH
Pin 4 – HI
Pin 17 – LO AES 6 In
Pin 5 – SH
Pin 15 – HI
Pin 3 – LO AES 7 In
Pin 16 – SH
Pin 1 – HI
Pin 14 – LO AES 8 In
Pin 2 – SH
Typical DB-25
connector
Note: These inputs can be used as four
mono inputs. The default names of these
inputs correspond to the inputs as follows:
Mic1 is Line 9 Lt In
Mic2 is Line 9 Rt In
Mic3 is Line 10 Lt In
Mic4 is Line 10 Rt In.
When used as four mono sources they are
still line level inputs, and they are not
internally connected to the four mic
preamps.
To Next Page
Loading...