AudioArts Engineering D-16 - Master Output Wiring and Pinouts

page 8 – 3
D-16 / Feb 2003
MASTER OUTPUTS
Hook-Ups
As stated before, all user wiring takes place at DB-25 connectors, located
on the rear of the console.
DB-25 “ANALOG OUT” Connector - Analog Audio
Outputs
Includes Program, Audition, Mono1, Mono2, CUE and Talkback out-
puts. All analog audio is +4dBu balanced. A pinout drawing on page 8-4
shows all wiring connections at a glance.
Pin 24 – HI
Pin 12 – LO PGM Lt Out
Pin 25 – SH
Pin 10 – HI
Pin 23 – LO PGM Rt Out
Pin 11 – SH
Pin 21 – HI
Pin 9 – LO AUD Lt Out
Pin 22 - SH
Pin 7 – HI
Pin 20 – LO AUD Rt Out
Pin 8 – SH
Pin 18 – HI
Pin 6 – LO Mono 1 Out
Pin 19 – SH
Pin 4 – HI
Pin 17 – LO Mono 2 Out
Pin 5 – SH
Pin 15 – HI
Pin 3 – LO CUE Out
Pin 16 – SH
Pin 1 – HI
Pin 14 – LO TB 4 Out
Pin 2 – SH
DB-25 “DIGITAL OUT” Connector - Digital Audio Outputs
Handles digital Program and Audition outputs (AES format). A pinout
drawing on page 8-4 shows all wiring connections at a glance.
Pin 24 – HI
Pin 12 – LO PGM Out
Pin 25 – SH
Pin 21 – HI
Pin 9 – LO AUD Out
Pin 22 - SH
Typical DB-25
connector