AudioCodes Mediant 800 Installation Manual

Installation Manual 22 Document #: LTRT-28087
Mediant CCE Appliances
4.2.2 Step 2: Run CCE Setup Wizard
The procedure below describes how to run the CCE Setup Wizard.
 To run the CCE Setup Wizard:
1. Access the Recovery partition, “Recovery (D)”.
Figure 4-10: PC Directory
2. Double-click CCE.Setup.Wizard. The Install Wizard checks for CCE Install Wizard
updates. If a newer version of the Install Wizard is found, it will start downloading the
new version. Once new version is downloaded the installer will close itself and will run
the new downloaded Install Wizard.
Figure 4-11: Mediant Server – CCE Appliance
3. Click Next to continue.

AudioCodes Mediant 800 Specifications

General

Protocols	SIP, H.323
Digital Interfaces	1/2 E1/T1 PRI
Management	Web, CLI, SNMP
Mounting	19-inch rack
Codecs	G.711, G.729, G.722, G.723.1
Power Supply	100-240V AC
Operating Temperature	0 to 40°C
Storage Temperature	-25 to 70°C
Humidity	10% to 90% non-condensing