Installation Manual A. BIOS Setup
Version 2.0.5 61 Mediant 800 CCE & Mediant Server CCE
A.2.1 Power Performance Settings
This section describes how to verify the power performance settings of the Mediant Server
CCE appliance.
To verify the power performance settings:
1. Choose Power Management Options.
Figure A-6: Power Management Options
2. Choose HP Power Profile and verify that the power is set to maximum performance.
Figure A-7: HP Power Profile
3. Go to HP Power Regulator and verify that it is set to HP Static High Performance
Mode.
To Next Page
Loading...
