- 14 -
description and the right is the IP and MAC address. What’s more, the assign mode
(dynamic/static) is noted behind the IP address.
1) Correlative description for IP address settings
In order to search and set printer’s IP address conveniently for the first time, the factory default
setting is DHCP mode which assigns IP address dynamically. If there is no DHCP server in the
connected LAN and printer is set to DHCP mode as well, then it will use the internal pre-set
address (IP: 10.0.0.1, Subnet Mask: 255.255.255.0) automatically.
It is suggested that printer’s IP set to static in actual usage, which can cut down the time when
initializing the Ethernet interface as the printer is turned on and prevent IP conflicts (The dynamic
address used in printer may conflict with another one). The network segment part of the IP
address and Subnet Mask must be the same as those of PC connecting with a printer. For
example, the address of working PC is 192.168.0.1/255.255.255.0 (IP/Subnet Mask), then which
of printer should be set to 192.168.0.x/255.255.255.0（x=2~254 and should avoid the IP in used. It
is not restricted for NetFinder to search printers in the same network but different segment parts
(can not stride gateway). Relative glossary of IP address may refer to corresponding information.
2) Setting printer’s IP address
Select the printer information to be modified (black frame appears), click “Assign IP” button. Set the
IP in the dialogue box appearing.
To Next Page
Loading...
