- 61 -
• Paper with the whole page folded can not be used.
(As the paper strength has been changed even after amending.)
• Please amend the fold of the corner to less than 2 mm.
○ Bend and curliness (cut sheet, tractor paper)
• The paper can be used when the bend of the whole page is less than 2 mm.
• The bend length starts from the bend point should within 15mm. But when the bend height is
over 2 mm, paper can not be used.
8.1.4 Tractor Paper
Tractor paper is the continuous paper which has gear holes and the traverse perforations lines.
Refer to the following table for the requirement of tractor paper.
Paper with the whole page folded can not be used.
The fold of corner
Amend it to
less than 2mm
More than 15 mm
Bend
Amend it
to less
than 2 mm
Less than 15 mm
Whole page bend
Less than 2 mm
Arc
To Next Page
Loading...
