- 3 -
Note:
1. Please take the specific interface as standard.
2. This product can configured with DB-25 serial interface, so the interface type is parallel
interface + DB-25 serial interface at this time.
2.4 Installing the Printer
Before placing the printer in your chosen location, consider the following guidelines:
This printer should be put on a place that the surface is level and avoid installing the ribbon in an
unproper way.
Do not place the printer where belong to the following conditions:
The place is overheating or humid.
The place is shaking.
Do not install the printer where it may be subjected to unsuitable conditions such as:
·Where there is excessive dust
·Where it may be splattered with oil or metallic dust
·Where it may be exposed to direct sunlight
·Where it may be accidentally splashed with water
2.5 Installing the Ribbon Cartridge
1. Make sure the printer is turned off.
2. Open the front cover, move the print head to the left of the printer. (As shown in the following figure)
Fi
To Next Page
Loading...