- 72 -
Caution: • Envelope refers to single layer envelope. The double layer envelope is not supported and
the envelope should not be with solid edge.
• When the envelope pulp at the top or bottom, please don’t print at that area within 5mm.
• The sunken place in the bottom of the envelope belongs to the non-printable area.
Please ensure the distance from the bottom sunken line to the printing area is not less
than 5mm.
• Do not use following envelopes:
• Envelopes with contents in it.
• Envelopes with holes and which both sides are coherent in the middle.
• Envelopes which seal lip parts are folded.
• Envelopes which seal lip parts are pulped.
• If you print near the pulped area, even though it belongs to the printable area, it may also
cause paper dirt because of the pulp (especially when the edge is folded or stuck up).
Sample 2 Envelope print direction and printable area
Stam
To Next Page
