Autel MaxiPRO MP900 - Manual Input; Scan Vin;License

14
4.2.2 Manual Input
For vehicles that do not support the Auto Detect function, you may manually enter the
vehicle VIN.
➢ To perform Manual Input
1. Tap the Diagnostics application button from the MaxiPRO Job Menu. The
Vehicle Menu displays.
2. Tap the VID button on the top toolbar.
3. Select Manual Input.
4. Tap the input box and enter the correct VIN code or license number.
5. Tap OK. The vehicle will be identified and matched to the vehicle database, and
the system will guide you to the vehicle Diagnostics Menu screen.
4.2.3 Scan VIN/License
MaxiPRO diagnostic tablet also supports Scan VIN/License function. Enabling this
function will automatically turn on the camera. With the help of the camera system, the
vehicle’s VIN or license number can be easily recognized.
NOTE
The method of scan license is supported in some countries and areas. Please manual
input the license number if it is not available.
➢ To perform Scan VIN/License
1. Tap the Diagnostics application button from the MaxiPRO Job Menu. The
Vehicle Menu displays.
2. Tap the VID button on the top toolbar to open the dropdown list.
3. Select Scan VIN/License.
4. The camera will be launched. On the right side of the screen, from top to bottom,
three options are available: Scan QR Code/Barcode, Scan VIN, and Scan
License Number.
5. Select one of the three options and position the tablet to align the VIN, license
number or the barcode within the scanning frame. The scan result will display
on the Recognition Result screen. Tap OK to confirm the result, and then the
vehicle information confirmation screen will display on the tablet.