36
⚫ Pre-Scan Function
Select a vehicle button from the Vehicle Menu screen. Enter the maintenance order
number in the pop-up box to scan and detect the whole vehicle. You can also add
pictures to record the current condition of the vehicle. Once the pre-scan is
completed, you are not allowed to perform pre-scan again, and the scan result
cannot be modified.
⚫ Post-Scan Function
After the pre-scan is complete, exit this diagnostic session. Then select the vehicle
brand from the Vehicle Menu screen again. Enter the same maintenance order
number in the pop-up box. The post-scan will proceed and the record will be
generated after scanning.
NOTE
The post-scan function can be performed repeatedly. After exiting the vehicle, you only
need to tap the vehicle button from the Vehicle Menu screen to reconnect again, then
enter the same maintenance order number in the pop-up box and follow the steps to
rescan. The last post-scan result is the final one.
4.6.2 Diagnostics Report Saving, Viewing, and Sharing
The diagnostic report can be reviewed, saved, and shared with others through many
ways.
4.6.2.1 Diagnostics Report Saving
⚫ Via the History function
1. Enter the main screen of the Diagnostics application, and tap History on the
top toolbar.
To Next Page
Loading...
