24
3. Function Button
⚫ Freeze Frame — tap to view the freeze frame data.
⚫ Search — tap to search related fault code information on the Internet.
⚫ Erase Codes — tap to erase the fault codes.
⚫ ESC — tap to return to the previous screen or exit the function.
B. Erase Codes
After reading the retrieved codes and making repairs, you can erase the codes from
the vehicle using this function. Before performing this function, make sure the
vehicle's ignition key is in the ON (RUN) position with the engine off.
➢ To erase codes
1. Tap Erase Codes from the Trouble Codes screen.
2. A warning message displays to inform you of data loss when this function is
applied.
a) Tap Yes to continue. A confirmation screen displays when the operation is
successfully done.
b) Tap No to exit.
3. Tap ESC on the confirmation screen to exit Erase Codes.
4. Perform the Read Codes function again to ensure the operation is successful.
4.4.4 Live Data
When this function is selected, the screen displays the data list for the selected module.
The parameters display in the order that they are transmitted by the ECU, so expect
variation among vehicles.
Gesture scrolling allows you to quickly move through the data list. Drag your finger(s) up
or down to reposition the parameters being displayed if the data occupies more than one
screen. The figure below shows a typical Live Data screen:
To Next Page
Loading...
