Autel MaxiPRO MP900 - Push Notifications; Firmware Upgrade

58
appears blue if the function is enabled and displays gray if the function is disabled.
NOTE
Make sure the tablet is connected to network while uploading reports.
7.5 Push Notifications
This option allows you to manage notifications. The Notification Preferences option is
turned on by default and cannot be turned off by users so that certain system notifications
such as system security warnings will not be blocked.
➢ To manage other notifications
1. Tap the Settings application on the MaxiPRO Job Menu.
2. Tap the Push Notifications option on the left column.
3. Tap the button on the right of the Other Notifications option to open a drop-
down list.
4. There are four options: Enable All Notifications, Limit to 3 Notifications or Less
per Week, Limit to 1 Notification per Week, and Disable All Notifications. Select
whichever you prefer.
NOTE
⚫ Notifications will display on the screen. Slide the screen from top to check the
received messages. If the message list covers more than one screen, slide the list
up or down to view them.
⚫ Tapping a specific message launches the corresponding application. For example,
if you tap on an Update notification, the Update application will be launched.
7.6 Firmware Upgrade
This option allows you to upgrade the firmware of the tool. Connect the tablet to the
vehicle through DLC and use the USB type-C cable for power supply. Follow the on-
screen instructions to complete the operation. Internet connection is necessary for this
operation.