55
7 Settings
Selecting Settings application opens a setup screen, on which you can adjust default
settings and view information about the MaxiPRO system. The following options are
available for the MaxiPRO system settings:
⚫ Unit
⚫ Language
⚫ Printing Settings
⚫ Report Settings
⚫ Push Notifications
⚫ Firmware Upgrade
⚫ Auto Update
⚫ Vehicle List
⚫ System Settings
⚫ About
This section describes the operation procedures for the settings.
7.1 Unit
This option allows you to adjust the measurement unit for the diagnostics system.
➢ To adjust the unit setting
1. Tap Settings on the MaxiPRO Job Menu.
2. Tap Unit on the left column.
3. Select the appropriate measurement unit. A check mark will display to the right
of the selected unit.
4. Tap the Home button on the top-left corner to return to the MaxiPRO Job Menu,
or select another setting option for system setup.
To Next Page
Loading...
