Chapter 3: Configuration and Parameters
Page 3–13Stellar
®
SR55 Series Soft Starter User Manual – 1st Ed, Rev F – 09/18/2019
parameTers from “deviCe” menu CaTegory – summary
Summary – Parameters for Touchscreen Setup – “Device” Category
Category – Device
Group Parameter Units Range
Read /
Write
Modbus
Default
Setting
User
Setting
Address Hex
(P25)
[detailed info
starts page
3–82; See
important
P25.4
PASSCODE
WARNING!]
P25�0 – Update Firmware – – R/W – – –
P25�1 – Date – current date R/W – – –
P25�2 – Time hh:mm:ss GMT / local R/W 14720 3980 GMT
P25�3 – Language –
refer to the “Parameter
Details” section for list
of available languages
R/W 13376 3440 English
P25�4 – Passcode – 0 to 255 per Byte R/W
12864
12865
12866
12867
3240
3241
3242
3243
n/a
P25�5 – Backlight Timeout s 0 to 3,600 R/W 14208 3780 60
(P26)
Networks
[detailed info
starts page
3–80]
P26�0 –
Modbus Network Address
– 1 to 32 R/W 16000 3E80 1
P26�1 –
Modbus Network Baud Rate
Baud
9,600
19,200
38,400
57,600
115,200
R/W 16064 3EC0 19,200
P26�2 –
Modbus Network Parity
– none / odd / even R/W 16128 3F00 even
P26�3 –
Modbus Network Traffic LEDs
toggle OFF / ON R/W 14080 3700 OFF
P26�4 –
Anybus / ModbusTCP /
EtherNetIP
–
Address
Serial Number
Firmware Version
Connection
Read – – – –
P26�5 – Timeout ms 0 to 60,000 R/W 15808 3DC0 5,000
P26�6 –
Communications Shutdown
toggle OFF / ON R/W 53802 D22A ON
(P27)
[detailed info
starts page
3–82; See
important
P27.0 & P27.2
PASSCODE
WARNINGS!]
P27.0 – Reset Defaults – Yes / No R/W 62080 F280 No
P27�1 – About –
SR55 model #, serial
#, software versions
Read – – – –
P27�2 – Screen Lock toggle OFF / ON R/W 12992 32C0 OFF
P27�3 – Date Format –
dd/mm/yyyy
mm/dd/yyyy
R/W 13248 33C0 dd/mm/yyyy
P27�4 – Temperature Format degrees °C / °F R/W 13312 3400 °C
P27.5 – Parameters to USB Yes / No R/W 62272 F340 No
P27.6 – Parameters from USB Yes / No R/W 62336 F380 No
P27�7 – Service Code for manufacturer’s use only 13120 3340
To Next Page
Loading...
Need help?
General
