Panel Overview
System Description and Operation, AutroSafe Maritime Gas Detection, 116-P-BS420MG/XGB, Rev. E, 2019-12-10,
Autronica Fire and Security
Page 22
6. Panel Overview
6.1 Introduction
6.1.1 Panel Variants
The user interface and operation of the Maritime Gas Panel
BS-420MG and the Operator Panel BS-430 are identical. The panel is
therefore referred to as the operator panel throughout this handbook.
The Information Panel serves as an indication device only.
The LED indicators are identical to the ones on the upper section of
the operator panel, but the panel provides different buttons.
6.1.2 Indication Devices
During normal operation when the power is ON, the Power indicator
always displays a steady green light.
Apart from this, only indicators relevant to the actual condition are
visible. For example, if a fault is present the fault indicator will have a
yellow light.