Autronica AutroSafe Maritime Gas Detection - 15.1.3 Set Alarm Limits

Gas Commands
System Description and Operation, AutroSafe Maritime Gas Detection, 116-P-BS420MG/XGB, Rev. E, 2019-12-10,
Autronica Fire and Security
Page 71
15.1.3 Set Alarm Limits
The Set Alarm Limits command allows you to change a gas detector’s
alarm limit for Low Alarm and High Alarm.
Step
Actions to be taken
Display Indication
1
To enter the Main Menu, press the Menu button
2
To select SERVICE, press 5.
3
To select OIL & GAS COMMANDS, press 8.
4
To select SET ALARM LIMITS, press 3.
SERVICE
19:23
SET ALARM LIMITS
Name: _
Gas Detector
Type:
MENU
19:23
Total: 3
1 SHOW STATUS
2 DISABLE
3 ENABLE
4 SYSTEM
5 SERVICE
SERVICE
19:23
1 TEST
2 LOG
3 LOOP COMMANDS
4 REPORT
5 UPGRADE
6 REMOTE ACCESS
7 DUAL SAFETY
8 OIL & GAS COMMANDS