Autronica AutroSafe Maritime Gas Detection User Manual

Service Commands
System Description and Operation, AutroSafe Maritime Gas Detection, 116-P-BS420MG/XGB, Rev. E, 2019-12-10,
Autronica Fire and Security
Page 62
Loop Commands
Disable Loop
Enable Loop
Note that when leaving the Control Menu, Read Parameters and Read
Filter are reset to default values.
Clear Log
This menu selection allows you to clear the entire Log Menu for all
events previously recorded.
14.5 Loop Commands
14.5.1 Disable Loop
This menu allows you to disable one loop at a time without interrupting
the system. This can be useful during maintenance, when detectors
are changed on the loop etc.
Note that only points "remember" their original Enable / Disable state.
14.5.2 Enable Loop
This menu allows you to enable one loop (a selected loop) at a time
without interrupting the system.

Autronica AutroSafe Maritime Gas Detection Specifications

General

Brand	Autronica
Model	AutroSafe Maritime Gas Detection
Category	Security System
Language	English